Introduction to Door Pro
|General Features of Door Pro
The ONLY Software in its Class, completely set apart from any other Door Manufacturing Software!
|Door Pro CNC comes with all features of Door Pro Standard, discussed above, as well as the CNC features discussed below.
|Panel Optimization and Nesting
|MDF Doors and Door Processing
|The CNC Operation, as processed by Door Pro
|Supported CNC Routers within Cabinet Pro and Door Pro
Supported CNC Languages:
Most CNC routers read an industry standard
language called "G-Code". Although most routers supported by Cabinet Pro CNC accept G-Code instructions,
we also write to machines requiring other languages as well, such as Woodwop,
BiesseWorks, and Wincut. You may customize the g-code output, since Cabinet Pro CNC allows the post
processor to be user-defined.
Cabinet Pro supports all CNC routers that use Woodwop, Biesseworks, Wincut, Xylog, or any variation of g-code. Because Cabinet Pro's post processor is user-defined, the CNC code can be greatly modified, if necessary. So if different commands are needed, or if commands need to be ordered in a different sequence than is part of the already existing post processors listed below, this can be done very easily within Cabinet Pro (or Door Pro). We will work with someone of your choosing, who is familiar with the g-code necessary to run your machine, and within a very short time will have your g-code output matching the specific requirements of your CNC router.
If your CNC router
requires code that is unique or slightly different from the posts
listed above, we may need to modify an already
existing Post Processor for your specific machine. This is a
relatively simple task and
will be done
at no additional charge, as long as you are willing to help test the
modifications, and the changes
are not extensive.
Click here for a comparison study of Cabinet Pro